TRICON partners with ACS Industries to provide nationwide bucket rebuild and service solutions. Send worn buckets to our regional U.S. service centers to keep operations running efficiently.
FOR IMMEDIATE RELEASE
Tricon Wear Solutions and ACS Industries Partner to Deliver the World’s Most Durable Buckets for Mining and Aggregate Operations [Irondale, AL – MARCH 2, 2026] — Tricon Wear Solutions and ACS Industries have announced a joint venture partnership focused on manufacturing and rebuilding excavator and wheel loader buckets for mining and aggregate operations. Through this collaboration, Tricon will supply its proprietary wear materials— Tri-Braze® and Super-C® —to support the design and manufacture of ACS products. The intent is to manufacture a product with greater wear capabilities while reducing the overall weight of the bucket. This is very important in the mining and aggregate markets, helping reduce machine stress while increasing productivity. The partnership includes new buckets and ACS’s bucket rebuild program, designed to reduce downtime, extend service life, and lower the total cost of ownership. ACS, a Strickland MFG company, brings decades of experience designing and rebuilding buckets for abrasive, high-impact environments common in quarrying and mining. Their heavy-duty and Severe Duty Rock bucket designs emphasize structural integrity, replaceable wear components, and compatibility with a wide range of pin-on and coupler systems, making them well-suited for rebuild strategies rather than a full bucket replacement. Under the partnership, ACS will integrate Tricon wear materials into high-wear and impact zones during bucket manufacturing and rebuilds in its Asbury line of products. • Tri-Braze® alloy steel will be used in structural and impact-loaded areas requiring through-hardness, toughness, and crack resistance. • Super-C® chromium carbide overlay plate will be applied in zones exposed to severe abrasion, such as floors, heels, sidewalls, and material flow paths. This material pairing enables both new and rebuilt products to be engineered for how buckets actually wear in service—balancing impact resistance with extreme abrasion protection—rather than relying on a single material throughout. “For maintenance teams, the goal is predictable wear and fewer unplanned outages,” said Tricon’s Chief Commercial Officer, Anthony Stanley . “This partnership gives customers the confidence that the product will have reduced wear, meaning less downtime and more productivity.” “ACS has chosen Tricon based on the quality of their products and services to customers. We share a commitment to providing high-quality, durable wear parts for quarry and aggregate operations. Together, we can produce a bucket that is both lighter and more durable, allowing customers to run more efficiently. Eric Carper, CEO of the wheel loader division of ACS/Asbury, a Strickland company.
Page 1 of 2
For mining and aggregate maintenance directors, the joint offering provides a thorough partnership with our customers. When supplying a new bucket, ACS continues to monitor it throughout its life cycle, rebuilding it as needed. Rebuilt buckets are returned to service with reinforced wear zones, extended maintenance intervals, and materials selected specifically for the application and material being handled.
The Tricon–Strickland partnership supports operations looking to: • Extend bucket life cycles • Reduce emergency repairs and downtime • Improve wear predictability in abrasive applications • Control capital and maintenance spend through rebuild programs
Rebuild services are available for a wide range of excavator and wheel loader bucket configurations used in aggregate pits, quarries, and mining operations. To learn more about TRICON’s nationwide bucket rebuild services, visit: https://catalogs.triconwearsolutions.com/view/343228762/
ABOUT TRICON WEAR SOLUTIONS Tricon Wear Solutions is a leading manufacturer and service provider of proprietary abrasion and wear-resistant steel plate and pipe, engineered components such as castings, and custom fabrications for the most demanding industrial applications. With more than 55 years of experience, Tricon specializes in industrial wear solutions designed to reduce downtime, extend equipment life, and improve safety. To learn more about Tricon Wear Solutions and its Tri-Braze® and Super-C® products, visit www.triconwearsolutions.com . Tricon Wear Solutions is part of Construction Forms Inc. (CFI) , a global platform of trusted industrial brands dedicated to delivering strategic consumables for mission-critical wear and material flow applications. CFI’s portfolio brings together specialized companies focused on solving complex challenges in mining, concrete construction, aggregates, wood handling, metals & recycling, and other heavy industries—helping customers operate more reliably, safely, and efficiently where failure is not an option. ABOUT ACS INDUSTRIES ACS Industries is firmly entrenched in the quarry and aggregate sector as well as dealing with OEM, dealers and rental companies. ACS is a leader in the construction attachment industry. With reliable products preferred by most professionals, a strong balance sheet and a culture of achievement as its operating cornerstones, ACS is poised to continue its growth and market dominance into the future. It has earned that reputation with exemplary service and the best construction attachments in the world. ACS INDUSTRIES/ASBURY IS A DIVISION OF STRICKLAND USA. For more information on the attachments Strickland and ACS have to offer, including bucket rebuild programs, visit www.acs-coupler.com & www.stricklandus.com
CONTACT: Vicki Vassallo Director of Marketing, CFI vicki.vassallo@CFIcompany.com 262-339-0017
Page 2 of 2
Page 1 Page 2Powered by FlippingBook