WELDING & FORMING GUIDELINES GUIDELINES FOR SUPER-C® CLADDED WEAR PLATE
Examples:
Cutting Examples
Plasma arc cutting with conventional arc cutting techniques and gases are recommended for shape cutting, piercing large holes, and beveling.
Grinding
Prime-Arc 85™
Grinding and EDM methods are the only proven, satisfactory methods for precision removal of metal. When grinding a hard-grit, a soft bond wheel is required. For non-precision metal removal and hole piercing, use carbon arc gouging.
Prime-Arc 3™
Cold Forming
Generally, the power required to form Super-C will be approximately the same as required for low carbon.
Prime-Arc 85™
Prime-Arc 3™
Welding
Super-C is normally supplied with plasma arc cut edges ready for welding. Welding to carbon steel support structures is accomplished with either Prime-Arc 85™ or Prime-Arc 3™ electrodes using the proper welding procedures. Care should be taken to prevent the clad portion of the plate from diluting the fillet weld.
1-Layer
Prime-Arc 3™
Prime-Arc 85™
2-Layer
TRICONWEARSOLUTIONS.COM | 22
Powered by FlippingBook