PRIME-ARC™ 400 BUILD-UP WIRES AND ELECTRODES
PRIME-ARC 400™
BUILD UP FOR SUPERIOR BALANCE OF IMPACT AND ABRASION RESISTANCE Prime-Arc 400 is a metal-cored welding consumable, which provides a superior balance of impact and abrasion resistance. Its rich chemistry and dispersed carbide structure make it the best choice for fine particle, slurry, and mud-wear applications. WHY CHOOSE PRIME-ARC 400 Safely hard surface ultra high-strength, abrasion-resistant steels Slag is easily removable and produces tough, clean deposits Boron added for hardness, toughness and cleanliness Modified tool-steel chemistry can be forged at red heat Deposit does not typically exhibit check cracking, can be deposited check-crack free up to 2 layers, is martensitic, and is not readily machinable Deposit up to 650 BHN when applied to high-strength abrasion-resistant steels APPLICATIONS Prime-Arc 400 is a tool, steel-based weld overlay that provides excellent wear resistance in severe metal-to-earth and metal-to-metal applications where maximum wear life is critical. It can also be used on ultra-hard steels for increased wear life and applied to carbon, low-alloy, and manganese steels.
GAS TYPE OF OPEN ARC
PRODUCT
TYPE
POLARITY SIZE VOLTS AMPS STICK OUT
PKG
MAT
Prime-Arc 400 HNW
Flux-cored arc welding (wire) Flux-cored arc welding (wire)
D/C reverse polarity
25 lb. spool
0.045" 25-29 150-200 0.50"-0.75" 75% Ar/25% CO ₂
4022485
Prime-Arc 400 HNW
D/C reverse polarity
33 lb. spool
BEST SELLER
1/16" 27-31 200-250 0.75-1.00" 75% Ar/25% CO ₂
4022492
TRICONWEARSOLUTIONS.COM | 20
Powered by FlippingBook